Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Passaic, NJ
Gate Installation sits at the top of what people call us about in Passaic, and it’s usually not a decorative estate job. It’s a security gate on a narrow side-yard driveway, a slide gate across a shared rear alley, or a replacement for a rusted wrought-iron unit between two buildings. Passaic’s housing is old and tight: century-old frame two- and three-family homes and post-war brick apartment blocks, with hard freeze-thaw winters that move footings and seize hinges. We work on the brand you already have. Call (833) 983-2324.
Why Passaic Homes Are Different
Passaic’s housing stock is dominated by late-19th- and early-20th-century wood-frame two- and three-family homes, plus mid-century brick apartment blocks along the Passaic River corridor. That mix changes the gate work in ways a generalist misses. Narrow lots and shared driveways between buildings are the norm, so gates here are typically swing or slide units mounted to aging concrete or brick piers rather than standalone posts. When one of those piers shifts, the gate doesn’t just sag – it drags, the latch stops lining up, and the operator starts working against the frame.
The climate compounds it. Passaic sits in the humid Northeast with hard freeze-thaw winters and hot, humid summers, so hinges, rollers, latch bolts, and especially the concrete footings under brick piers heave, crack, and seize seasonally. Road salt tracked off Route 21 and Main Avenue accelerates rust on iron gates and operator chains. And because many of these properties are landlord-managed rentals in a heavily renter-occupied market, gate problems often go unreported until the hardware has failed outright. We troubleshoot the system in front of us, whether it’s a legacy Mighty Mule arm or a newer DoorKing setup.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Passaic Services
These are the two jobs Passaic property owners call us about most, and each has its own dedicated page.
Gate Repair in Passaic
Most gate repair in Passaic starts with something mechanical: a hinge that’s rusted solid, a roller that’s flat-spotted from grit, a latch bolt that no longer catches because the pier settled over the winter. On the tight blocks off Main Avenue and around the river’s flood-prone low streets, gates are often mounted on shared brick piers between adjacent properties, so a shifted footing is a conversation between two owners, not just a repair ticket. We document what we find so both sides understand the fix. If a gate has stopped working, see Gate Repair in Passaic.

Electric Gate Repair in Passaic
Electric gate repair in Passaic means control boards, safety sensors, loop detectors, and motor assemblies – the parts most general contractors won’t touch. Our technicians have up to 10 years of experience and work across LiftMaster, Elite, Mighty Mule, and the other operators common on these properties. Salt tracked off Route 21 eats at operator chains and gate contacts, and freeze-thaw seasons stress arm mounts and limit switches. For automated systems, see Electric Gate Repair in Passaic.

Gate Installation in Passaic
New Gate Installation in Passaic has to solve for a specific set of conditions: narrow lots, shared driveways, century-old brick piers that were never built to carry an operator, and freeze-thaw cycles that will find any weak footing within a season or two. A stock replacement dropped onto the existing pier is the reason so many gates here start dragging within a few winters. We measure the actual opening, check what the pier or post can carry, and match the gate and operator to the site – swing or slide, manual or automated. Whether you’re replacing a rusted wrought-iron unit on a frame house or spec’ing an operator for a brick apartment block, we handle the full cycle from measure to install. No handoffs to another contractor.
Automatic Gate Installation
Signs you need it
The gate itself is sound but someone still gets out of the car in the rain to open it, or the property has an operator that’s been patched together past the point of reliable repair.
What it costs in Passaic
Automatic gate installation in Passaic typically runs $2,500 to $6,500, depending on gate size, operator, and whether the footing and power run need work – the written estimate sets the final price.
How we do it
We measure the opening and pier condition, spec the operator and safety edges, confirm the power and low-voltage runs, then mount the operator and tune the travel, limits, and sensors against the actual gate.
Sliding Gate Installation
Signs you need it
A swing gate won’t clear the driveway or the shared lot boundary, or the existing slide gate has come off the track and the repair cost no longer makes sense.
What it costs in Passaic
Sliding gate installation in Passaic typically costs $2,800 to $7,000, including track and footing work – a written estimate confirms your number before any work starts.
How we do it
We set the track and footing to proper depth, hang the gate and check level and travel, then add the operator and safety edges if it’s automated and test the full cycle.
What Gate Installation Costs in Passaic
| Item | Typical range in Passaic |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Sliding gate installation | $2,800 – $7,000 |
| Full gate and operator install with footing work | $3,200 – $8,000 |
Can you install a gate on an existing brick pier in Passaic?
Often yes, but only after we check the pier. Many Passaic brick piers have shifted through freeze-thaw cycles, so we assess condition first and rebuild or re-foot when needed. Call (833) 983-2324 for a free estimate.
Do you handle the power run and the safety edges?
Yes. Automatic gate installation includes the operator, safety edges, sensors, and control setup. If a power run is needed, we scope it in the written estimate before any work starts. Call (833) 983-2324 to talk it through.
Brands We Service in Passaic
We service operators from at least nine brands, including LiftMaster, DoorKing, Elite, and Mighty Mule, plus FAAC, BFT, Linear, Viking, and Ghost Controls. We also take on legacy and mixed-brand setups other providers turn away. Because most problems are diagnosable on the first visit, turnaround stays predictable. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Passaic, NJ
| Service | Typical range in Passaic |
|---|---|
| Gate repair | $180 – $650 |
| Electric gate repair | $220 – $850 |
| Control board diagnosis and repair | $180 – $550 |
| Hinge, roller, and latch hardware | $120 – $400 |
| Automatic gate installation | $2,500 – $6,500 |
| Sliding gate installation | $2,800 – $7,000 |
| Driveway gate installation | $2,200 – $6,000 |
| Full gate and operator install with footing work | $3,200 – $8,000 |
In Passaic, price climbs when a brick pier has to be rebuilt, when footing depth has to be corrected, or when the gate opening is tight and the job needs custom fabrication. Every figure above is a typical range – the written estimate sets the final price, and that price is quoted and agreed before any work starts.
Neighborhoods We Serve in Passaic
We serve properties throughout Passaic, including the tight blocks off Main Avenue and the older frame homes on the streets near the Passaic River corridor. Because so many driveways here are shared, we’re used to working in tight access and coordinating with neighbors on adjacent properties. When you call, we’ll work around access constraints and give you an arrival window. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Blocks off Main Avenue
- Streets near the Passaic River corridor
- Multi-family frame homes near Route 21
- Post-war brick apartment blocks in the 07055 area
Service Area – Cities Near Passaic
Passaic borders a cluster of smaller towns with the same housing-era and climate conditions, so the gate work there looks familiar. We also serve properties in Wallington, NJ, East Rutherford, NJ, Wood-Ridge, NJ, and Carlstadt, NJ. If you’re in one of those towns and your gate won’t latch, the operator’s faulting out, or you’re planning a new install, call and we’ll sort out scheduling.
Serving Passaic, NJ – Our Local Coverage Area
We serve Passaic and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Passaic
Same-day service is often possible. Call (833) 983-2324. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
Most cities require a permit for an automatic gate and the electrical connection to it, so ask Passaic’s building department before scheduling. We can answer questions you want to bring to them before the written estimate is set.
Yes, often. Many Passaic properties are landlord-managed two- and three-family homes with shared driveways and brick piers straddling property lines. We document what we find so the owner and neighbor both understand the scope before the written estimate.
If your gate won’t open, won’t close, or needs a new install, call (833) 983-2324 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Passaic Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Holly Miller"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Adriana Salazar"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Cole Ackerman