Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Newark, NJ
Gate installation in Newark means building for a city that was mostly standing before 1930. The houses are brick and wood-frame, the front yards are iron, and the gates hang on masonry rather than on clean new posts. That changes everything about how a gate is measured, set and anchored. We’re a gate company that works only on gates, residential and commercial, manual and automatic. Our technicians have up to 10 years of experience, and they’ve pulled enough rusted hinges out of century-old brick to know what a Newark gate is really mounted to. Call (833) 983-2324 for a free estimate.
Why Newark Homes Are Different
Newark’s gate work is shaped by three things: the age of the housing, the masonry, and the weather. The city’s two- and three-family houses and brick rowhouses were built at the turn of the last century, and their front-yard iron fencing and gates were installed as part of the original property line. Many of those gates are set into brick piers rather than mounted on steel posts, and those piers have been settling for a hundred years.
Then there’s the freeze-thaw cycle. Newark winters push frost into shallow old footings, and posts that were plumb in October lean by March. Humid summers and road salt go after the hinges and welds at the same time, so rust and misalignment usually show up together. Add the city’s long history of wrought-iron and steel fabrication in the industrial wards, and you get a lot of welded and cast-iron gates that need real metalwork rather than a bolt-on replacement. If a gate opens and closes, we service it – and in Newark, that often means repairing the gate in front of us rather than selling a new one.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Newark Services
Most Newark calls come down to two things: a gate that won’t work and needs fixing, or a gate that’s beyond saving and needs to be replaced.
Gate Repair in Newark
Gate repair here is usually a mix of hardware and masonry. A sagging gate on an old front-yard fence line is often a hinge problem sitting on top of an anchoring problem, and a shared brick property-line pier between neighbors means the fix has to work for both sides of that boundary. We look at the whole assembly – hinges, latch, frame, anchoring, and the pier itself – before we quote anything. Rusted weld seams on iron gates get repaired, not painted over and forgotten. If it opens and closes a gate, we service it. For the full scope of what we handle, see Gate Repair in Newark.

Electric Gate Repair in Newark
Automated gates around Newark’s apartment conversions and commercial lots bring their own set of failures: control boards that won’t take a command, safety sensors knocked out of alignment, loop detectors that stop seeing a car, and motor arms that stall halfway. These are the parts general contractors typically won’t touch. We troubleshoot the system in front of us rather than running a brand-specific playbook, which matters on older and mixed-brand setups. We work on LiftMaster, DoorKing and the rest of the major operators. Details live on Electric Gate Repair in Newark.

Gate Installation in Newark
Installing a gate in Newark starts with what’s already there. Most properties we see have an existing front-yard fence, a brick pier at the property line, or a driveway opening between two rowhouses, and the new gate has to work with that geometry. Frost heave is the other factor: a post set to proper footing depth is the difference between a gate that stays true and one that drags on the ground every March. We handle Gate Installation as a planned job – measured on site, matched to your opening, and priced in writing before anything is ordered or dug.
Automatic Gate Installation
Signs you need it
The gate is manual, you’re tired of getting out of the car in the rain, and the driveway or entry is used dozens of times a day.
What it costs in Newark
An automatic gate opener installed typically runs $1,200 to $2,500 for a residential swing gate, with the gate itself extra; the written estimate fixes the final price.
How we do it
We measure the opening, check the anchoring surface and wiring path, set the operator and its safety edges, then test the full cycle with the remote and any keypad or entry device.
Driveway Gate Installation
Signs you need it
The driveway is open to the street, and you want a physical barrier that also works with an operator later if you don’t automate it now.
What it costs in Newark
A new driveway gate installed typically falls between $1,500 and $4,000 depending on width, material and whether posts need new footings; the written estimate sets the final price.
How we do it
We measure the clear opening, decide whether the gate swings or slides, set and level the posts to proper footing depth, hang the gate, and check the latch and clearance across the full arc.
What Gate Installation Costs in Newark
| Item | Typical range in Newark |
|---|---|
| Automatic gate opener installed | $1,200 – $2,500 |
| New driveway gate installed | $1,500 – $4,000 |
| Electric gate installation with operator and safety edges | $2,500 – $6,000 |
Can you install a gate on an old brick pier in Newark?
Usually yes, if the pier is sound. We check the masonry first and re-anchor or rebuild the mounting point when the brick has spalled or shifted. Where the pier is shared with a neighbor’s fence, the fix is planned for both sides.
Do you handle the power run and the safety edges?
Yes. Automated gate work covers the operator wiring, safety edges and any entry device like a keypad or loop. That’s work we schedule and measure ahead of time rather than treat as an add-on. Call (833) 983-2324 for a free on-site estimate.
Brands We Service in Newark
We work on the brand you already have. That includes LiftMaster, DoorKing, Elite and Mighty Mule, plus the other major operators you’ll find on gates around Newark. Older mixed-brand setups are common here and we take them on. Most diagnosis happens on the first visit. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Newark, NJ
| Service | Typical range in Newark |
|---|---|
| Automatic gate opener installed | $1,200 – $2,500 |
| New driveway gate installed | $1,500 – $4,000 |
| Electric gate installation with operator and safety edges | $2,500 – $6,000 |
Price moves with the material and width of the gate, whether new footings are needed, and how much masonry work the anchoring point requires on an older Newark property. Every job is quoted upfront and agreed before any work starts, so the written estimate is what you pay.
Neighborhoods We Serve in Newark
We cover Newark from the Ironbound to the North Ward and everything between. Older wards with shared brick property-line piers are where most of the re-anchoring work happens, and the more recent apartment and commercial conversions along the main corridors bring the electric gate calls. Dispatch runs 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
- Ironbound
- North Ward
- Forest Hill
- Weequahic
- Downtown Newark
Service Area – Cities Near Newark
Newark sits in the middle of a tight ring of older, densely built towns that share the same housing stock and the same gate problems. We also work in Ampere North, NJ, Watsessing, NJ, Silver Lake, NJ and East Newark, NJ. If you’re just outside the city line, call and we’ll confirm coverage for your address.
Serving Newark, NJ – Our Local Coverage Area
We serve Newark and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Newark
We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 983-2324 for a free estimate.
Often yes, especially when new footings, masonry work or electrical connections are involved. Requirements vary by property and zone, so check with the city’s building department before work starts. We’ll tell you what the job involves so you know what to ask.
Yes. We handle residential and commercial gate systems, from a home’s front-yard iron gate to an apartment or business entry with an operator, access control and loop detectors. Call (833) 983-2324 for a free estimate on either.
Whether a gate is jammed, sagging on an old pier, or ready to be replaced, the next step is the same: tell us what it’s doing and we’ll come look. Call (833) 983-2324 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Newark Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Holly Miller"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Adriana Salazar"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Cole Ackerman